Seller Needs:
$18,500|
12211
|
3
Pre-owned STRATASYS F370 2021 3D Printer. This unit has hardly been Used. Whether you have production parts, Jigs & Fixtures, or Prototypes, This Stratasys F123 Series Model F370 3D Printer is THE solution for you. ...Read More
Seller Needs:
Payment:
Rigging:
$800
Specs:
X Axis 14"
Y Axis 10"
Z Axis 14"
Up to 4 Materials – ABS, PLA, ASA & PC-ABS
GrabCAD Print
4 slice heights
4 material bays
Auto material change-over
Stratasys Insight Software
Dimensions:1,626 x 864 x 711 mm / 64" x 34" x 28"
Weight: 227 kg (500lbs) with consumables
Technology: FDM® technology
Noise Specifications
During build: 48 dB
When idle: 35 dB
Thermal: Extruder ?300° C
Chamber: 110° C, active convection
Build Size: 355mm x 254mm x 355 mm / 14" x 10" x 14"
Layer Thickness:
ABS: 0.330mm / 0.013"
ASA: 0.254mm / 0.010"
PC-ABS: 0.178mm / 0.007" 0.127mm / 0.005"
Layer Thickness:
Diran 410MF07: 0.330mm (0.013 in)
ABS-CF103: 0.254mm (0.010 in)
ABS-CF103: 0.178mm (0.007 in)
Layer Thickness:
PLA, FDM TPU 92A,
ABS-ESD7 0.254mm (0.010 in)
Model Materials
PLA2, ABS-ESD7â„¢, ABS-M30, ASA, Diranâ„¢ 410MF072,
FDM TPU 92A, PC-ABS, ABS-CF10, QSR
Support material
Cartilage Capacity: 4 material spool bays
2 for model, 2 for support located in a drawer on the front of the unit
Software, GrabCAD Print & Insight software license
Network Connectivity Wired: TCP/IP protocols at 100 Mbps minimum 100 base T, Ethernet protocol, RJ45 connector
Wireless-ready: IEEE 802.11n, g, or b;
Authentication: WPA2-PSK, 802.1x EAP;
Encryption: CCMP, TKIP
System Requirements:
Windows 7, 8, 8.1 and 10 (64bit only) with a minimum of 4GB RAM (8GB or more recommended)
Operating Environment
Operating: Temperature: 15 – 30 ºC (59 – 86 ºF),
Humidity: 30 – 70% RH
Storage:
Temperature: 0 – 35 ºC (32 – 95 ºF),
Humidity: 20 – 90% RH
Power Requirements: 100–132V/15A or 200–240V/7A. 50/60 Hz
Y Axis 10"
Z Axis 14"
Up to 4 Materials – ABS, PLA, ASA & PC-ABS
GrabCAD Print
4 slice heights
4 material bays
Auto material change-over
Stratasys Insight Software
Dimensions:1,626 x 864 x 711 mm / 64" x 34" x 28"
Weight: 227 kg (500lbs) with consumables
Technology: FDM® technology
Noise Specifications
During build: 48 dB
When idle: 35 dB
Thermal: Extruder ?300° C
Chamber: 110° C, active convection
Build Size: 355mm x 254mm x 355 mm / 14" x 10" x 14"
Layer Thickness:
ABS: 0.330mm / 0.013"
ASA: 0.254mm / 0.010"
PC-ABS: 0.178mm / 0.007" 0.127mm / 0.005"
Layer Thickness:
Diran 410MF07: 0.330mm (0.013 in)
ABS-CF103: 0.254mm (0.010 in)
ABS-CF103: 0.178mm (0.007 in)
Layer Thickness:
PLA, FDM TPU 92A,
ABS-ESD7 0.254mm (0.010 in)
Model Materials
PLA2, ABS-ESD7â„¢, ABS-M30, ASA, Diranâ„¢ 410MF072,
FDM TPU 92A, PC-ABS, ABS-CF10, QSR
Support material
Cartilage Capacity: 4 material spool bays
2 for model, 2 for support located in a drawer on the front of the unit
Software, GrabCAD Print & Insight software license
Network Connectivity Wired: TCP/IP protocols at 100 Mbps minimum 100 base T, Ethernet protocol, RJ45 connector
Wireless-ready: IEEE 802.11n, g, or b;
Authentication: WPA2-PSK, 802.1x EAP;
Encryption: CCMP, TKIP
System Requirements:
Windows 7, 8, 8.1 and 10 (64bit only) with a minimum of 4GB RAM (8GB or more recommended)
Operating Environment
Operating: Temperature: 15 – 30 ºC (59 – 86 ºF),
Humidity: 30 – 70% RH
Storage:
Temperature: 0 – 35 ºC (32 – 95 ºF),
Humidity: 20 – 90% RH
Power Requirements: 100–132V/15A or 200–240V/7A. 50/60 Hz
Options:
PC Based
2 Extrusion Heads
Some Consumables Included
2 Extrusion Heads
Some Consumables Included
Seller:
JessD428
Location:
CA
